BLYWN - SOLUTION S615A SI-1
- MSDS: BLYWN
- Manufacturer: NALCO CHEMICAL CO
- Product Name: SOLUTION S615A SI-1
- National Stock Number: 6810-00N023983
Product Identification
Product ID:SOLUTION S615A SI-1
MSDS Date:06/27/1989
FSC:6810
NIIN:00N023983
MSDS Number: BLYWN
Responsible Party
NAPERVILLE, IL 60563-1198
US
Emergency Phone: 708-920-1510
Info Phone: 708-305-1000
Preparer: RICKY A. STACKHOUSE
Cage: 89524
Contractor
Telephone: (630) 305-1000
Cage: 89524
Ingredients
MOLYBDIC ACID, DIAMMONIUM SALT; (AMMONIUM MOLYBDATE)(MFR
CAS: 13106-76-8
RTECS: QA4900000
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT):333 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAN CAUSE TRANSIENT IRRITATION.
SKIN:CAN CAUSE TRANSIENT IRRITATION. INGEST:CAN CAUSE KIDNEY
DAMAGE. ACUTE:LARGE DOSES OF AMMONIUM MOLYBDATE HAS CAUSED KIDNEY
DAMAGE IN EXPERIMENTAL ANIMALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MIN. CALL MD. SKIN:FLUSH
W/WATER FOR 15 MIN. INGEST:INDUCE VOMIT. GIVE WATER. CALL MD.
INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTIF RESP) .
NOTE TO MD:NO SPECIFIC ANTIDOTE IS KNOWN. BASED ON INDIV REACTIONS
OF PATIENTS, MD JUDGMENT SHOULD BE USED TO CONTROL SYMPTOMS &
CLINICAL CONDITIONS. CAUTION: IF UNCONC, HAVING TROUBLE BRTHG/
(SUPDAT)
Fire Fighting
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SWEEP OR VACUUM UP AND PLACE IN GARBAGE
COLLECTION CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT
WITH SKIN AND CLOTHING.
Other Precautions:DO NOT BREATHE SMOKE OR FUMES. WEAR SUITABLE
PROTECTIVE EQUIPMENT.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:IF SIGNIFICANT DUSTING OCCURS, LOCAL EXHAUST VENTILATION IS
RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:IN CONVULSIONS, DO NOT INDUCE VOMITING/GIVE WATER. WASTE
DISP METH:IS IT LISTED UNDER SUBPART D. AS A NON-HAZ SOLID WASTE,
IT CAN BE DISP OF IN AN INDUSTRIAL WASTE LANDFILL I/A/W LOC/ST
ATE/FED REGS. EMPTY PRODUCT CONTRS SHOULD BE PUNCTURED, IF PLASTIC
AND PLACED IN GARBAGE COLLECTION CONTAINERS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Solubility in Water:PARTIALLY
Appearance and Odor:WHITE TO SLIGHTLY GREEN/YELLOW POWDER WITH NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IN EVENT OF COMBUSTION AMMONIA MAY BE
FORMED.
Disposal
Waste Disposal Methods:IF PRODUCT SHOULD BECOME A WASTE, IT DOES NOT
MEET CRITERIA OF A HAZ WASTE AS DEFINED UNDER RESOURCE CONSERVATION
& RECOVERY ACT (RCRA)40 CFR 261, SINCE IT DOES NOT HAVE
CHARACTERISTICS OF SUBPART C, (I.E. D001 THROUGH D017) NOR
(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.